Electrical fires around the home can pop up when you least expect them. More often than not, the responsible culprit ends up being an item you use daily, without giving it a moment’s thought.
From frayed and worn-out extension cords to overloaded power points, your home may have hidden dangers that can spark a situation with zero warning. It’s easy to overlook these risks when you’re busy with life. Knowing which items commonly fall into the “guilty party” category and why can make all the difference in keeping your home and loved ones safe.
By learning about these common electrical offenders and taking simple precautions you’ll be better equipped to prevent a fire before it starts. After all, nothing is more important than your home.
1. Faulty Extension Cords
Extension cords make life easier in many ways. But if you don’t use them carefully, they can be potentially deadly.
Worn, frayed or damaged extension cords can overheat or spark and create a serious fire hazard. You can also exacerbate the situation greatly by using cords incorrectly, such as running them under rugs or using them as a permanent solution. Overloading them with too many high-wattage devices is another common mistake that can cause overheating.
Best way to avoid this problem from the outset? Inspect your extension cords regularly and replace any that show signs of wear or damage. Make sure you’re using cords that suit your needs. And remember this – extension cords are a temporary fix, not a permanent wiring solution. Be mindful and stay safe.
2. Overloaded Power Boards
Power boards are super convenient but overloading them can be a recipe for disaster.
Simultaneously plugging in too many devices can cause your power board to overheat and possibly cause an electrical fire. If you’re going to use them, make sure you know the maximum load of your power board and avoid daisy-chaining multiple boards together. This will only increase the risk of fire.
For an added layer of safety and protection, look for boards with built-in surge protection. As Mr Emergency explains, surge protectors safeguards your electrical appliances and devices from overvoltages caused by lightning strikes and power fluctuations. These overvoltages can result in irreparable damage to your appliances and possible house fire.
The best way to conquer this problem before it even has a chance to strike is to unplug devices when you’re not using them. You can also check for any signs of damage to the power board, like scorch marks or a hot-to-the-touch surface.
3. Space Heaters and Electric Blankets
On a cold, winter night, space heaters and electric blankets can be a bonafide lifesaver. If you don’t use them properly though, they can be the exact opposite.
We strongly recommend always keeping space heaters away from curtains, bedding or anything flammable as they can quickly ignite nearby items. Never leave your heater unattended and, in case it gets knocked over, make sure your heater has an automatic shut-off feature.
Then you have electric blankets. These can develop faulty wiring or worn-out spots that create hotspots and cause a fire. Always inspect your blanket for damage before use, don’t put heavy items on top and don’t leave it on overnight. A little caution goes a long way in keeping your warm and toasty setup safe.
4. Kitchen Appliances
There are many kitchen appliances that we use daily; appliances like toasters, kettles and microwaves. They’re must-have items for cooking breakfast, lunch and dinner, but can become a fire risk if you don’t maintain them properly.
Crumbs can build up in toasters over time and cause them to overheat and ignite. Kettles and coffee makers can develop faulty wiring or short circuits, particularly if water makes contact with the electrical components. Blocked vents in microwaves or fridges can also cause overheating.
Keep appliances clean; start by clearing out the crumb tray from your toaster. Check cords and plugs for damage, and unplug them when you’re not using them. Simple habits like these can prevent a situation. Remember appliances work hard in the kitchen so give them some much-needed TLC and they’ll stay safe and reliable.
5. Old or Damaged Lighting Fixtures
Old or damaged lighting fixtures can be more dangerous than you think. Fixtures that flicker, buzz or feel warm to the touch can be signs of loose connections or faulty wiring – both of which can cause an electrical fire.
Using light bulbs with a higher wattage than the fixture’s rating can also cause overheating and damage. Over time fixtures and wires degrade especially if exposed to humidity or dust buildup and can increase fire risk.
If a fixture looks old or damaged don’t ignore it. Replace or repair it ASAP. Dust and clean fixtures regularly to keep them in good condition and always use the right bulbs to avoid hazards. These days, LED bulbs are the way to go; they don’t waste nearly as much heat as old incandescent bulbs, which makes them significantly less of a fire risk.
Why You Need a Licensed Electrician
Electrical work is not to be taken lightly and when problems arise a licensed electrician is your best bet for safety and reliability. It’s also a legal requirement in Australia.
DIY fixes may seem tempting. They might seem like an easy way to save money, and you might feel a small sense of accomplishment if you pull it off. But when it comes to electrical work, DIY is illegal for a reason. Without the right training, you could make things worse or create a serious hazard.
Licensed electricians are trained to spot issues you might not notice, anything from hidden wiring faults to circuit overloads. They’ll make sure all electrical repairs and installations meet strict safety standards so you can have peace of mind. Plus electricians use quality materials and tools that will truly go the distance.
Investing in a professional will not only keep your home safe but also prevent costly and dangerous electrical mishaps in the future.
Stay Safe and Watch Out for Everyday Hazards
It’s amazing how simple, seemingly innocuous electrical items we use every day can be a serious fire risk, but a little awareness goes a long way. Faulty extension cords, overloaded power boards, kitchen appliances, space heaters and old lighting fixtures are just a few of the culprits you can easily address.
The best way to avoid fires caused by electrical items is with regular, consistent maintenance, safe use and being aware of warning signs. Always remember to call a licensed electrician when you need electrical maintenance, repairs or installation in and around your home.
Electrical safety isn’t just about your property. It’s about the people and memories that make your house a home. Stay aware and keep your space safe and sound.